10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump

Product Details
Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Gold Member Since 2006

Suppliers with verified business licenses

Audited Supplier Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
2
Year of Establishment
2012-03-21
  • 10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump
  • 10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump
  • 10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump
  • 10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump
  • 10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump
  • 10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump
Find Similar Products

Basic Info.

Model NO.
1400LPTCB-10(0 degree)
Impeller Number
Multistage Pump
Working Pressure
Low Pressure Pump
Influent Type of Impeller
Double-Suction Pump
Position of Pump Shaft
Vertical Pump
Pump Casing Combined
Verticaljoint Surface Pump
Mounting Height
Since Irrigation Centrifugal Pumps
Impeller
Semi-Open
Usage
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
Key Word
Vertical Pump
Pump Type
1400lptcb-10(0 Degree)
Outlet Diameter(Mm)
1400
Capacity (M3/H)
10620
Head (M)
10
Speed (R/Min)
370
Efficiency (%)
89.1
Motor Power (Kw)
400
Transport Package
Poly Plastic Firm, Wooden Box or as Need
Specification
10600m3/h Vertical Turbine Pum
Trademark
AVESPEED
Origin
Beijing, China
Production Capacity
300 Sets/Month

Product Description

10600m3/h Vertical Long-Axis Pump/Vertical Turbine Pump
General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.

Structure specification:
1. The inlet of LP(T) Type Pump shall be vertical downward and the outlet horizontal above or under the base.
2. The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: Non-adjustable, semi-adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3. On the basis of LP Type Pump, LP(T) type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4. The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5. It applies water lubricating rubber bearing and packing seal.
6. The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti-reverse device, effectively avoiding reverse of pump.
Pump type Outlet diameter(mm) Capacity (m 3 /h) Head (m) Speed (r/min) Efficiency (%) Motor Power (KW)
1400LPTC-9 1400 10656 10.6 370 83 500
12816 8.5 87
15228 5.8 82
1400LPTCB-10(-4 degree) 1400 7596 10.6 370 85.6 315
8856 8.6 88.7
9612 6.8 85.6
1400LPTCB-10(-2 degree) 1400 8172 11.4 370 85.6 350
9792 9.2 88.8
10800 7.2 85.6
1400LPTCB-10(0degree) 1400 8820 12.2 370 85.6 400
10620 10 89.1
11880 7.7 85.6
1400LPTCB-10(+2degree) 1400 9432 12.8 370 85.6 450
11412 10.7 89.6
12744 8.3 85.6
1400LPTCB-10(+4degree) 1400 10260 13.4 370 85.6 500
12240 11.3 89.2
13500 9.3 85.6
1400LPTCQ-10 1400 8856 8.5 370 88.7 500
9792 9.2 88.8
10620 10 89.1
11412 10.7 89.6
12240 11.3 89.2
1400LP(T)-14 1400 15300 18.7 370 84.5 1000
18000 14.2 89
21096 8.9 79
1400LP(T)-60 1400 12600 66 495 82 3600
16200 60 86
19800 49.5 82
1400LP(T)-60A 1400 11700 57.5 495 80 3150
15300 51.7 85
18000 44.5 82
1400LP(T)-60B 1400 12600 47.5 495 81 2500
14400 44.5 83
16200 40 81
 

10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump10600m3/H Vertical Long-Shaft Water Pump/Vertical Turbine Pump/Vertical Propeller Pump

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier