| Output Type: | AC Three Phase |
|---|---|
| Starting: | Hand Start |
| Phase: | Three-Phase |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1 Ratings and Emissions | rated power 150KW | ||||
| For operation on | Biogas | ||||
| Methane number | MZ ≥ 90 | ||||
| Low heat value(LHV) | Hu = 8,0-11,5 kWh/Nm³(20MJ/Nm3.) | ||||
| Heating water temperature | 80 / 70 °C | ||||
| Genset with synchronous generator for generating Gas mixture cooler (1 st stage HT) | Starlike 3P4W, 50Hz | ||||
| Gas mixture cooler,after | Turbo,Air/Air Cooling <50 °C | ||||
| Nox (mg/mn3) | Meet Europe two standard | ||||
| Genset compliance with standard | ISO3046,GB2820,GB755, CE | ||||
| Generator Set Electrical Performance Data | |||||
| Voltage Regulation,Stead State:≤±2%; | |||||
| Sudden Voltage Regulation:≤-15%-+20% | |||||
| Voltage Waving:≤±0.5% | |||||
| Line Voltage Waveform Sine Distortion Ratio:≤ 5% | |||||
| Frequency Regulation,Stead State::≤5% | |||||
| Sudden Frequency Regulation:≤17% | |||||
| Frequency Waving:≤0.9% | |||||
| Recovery Time:≤5s | |||||
| 2 Design Principles / Scope of Supply | |||||
| 2.1 Design Principles | |||||
| Generator use gas fuel as power supply and thermal dynamic conversion from spark ignition engine. Equipped with cooling,lubrication,fuel supply,control,power output,parallel gensets,base frame system which is a completed power output equipment. Low voltage,high pressure gas fuel is acceptable. | |||||
| Gas engine and flange-mounted alternator (SAE housing) are connected via a torsionally resilient coupling and resiliently mounted to a rigid, welded steel base frame. Between them there is vibration dampers for eliminating vibration. | |||||
| Genset controllers integrated on the base frame,adopting DeepSea or ComAp generator set controlling module | |||||
| Gas valves integrated on the base frame,gas valves including:pressure gage ,filter,pressure maintaining valve,safe solenoid,flame arrestor | |||||
| Gas Engine:Cummins NTAA855 engine,equipped with multi-sequential ignition engine management control system,one high energy ignition coin per cylinder,gas dedicated speed governor (WOODWARD),proportional gas mixer,exhaust gas turbocharge,air/air intercooler | |||||
| Alternator:Marathon/USA brushless self excitation AC synchronism alternator with PMG function | |||||
| Skid Mounted Generator Set | |||||
| 2.2 Scope of Supply | |||||
| Standard Configuration | Optional Device | ||||
| Gas engine repair kit 1 set | Battery Floating Charger | ||||
| Exhaust gas vibration-proof corrugated hose 1pc; | ATS automatic load switch cabinet | ||||
| Connecting bending pipe for exhaust gas pipe 1pc | Automatic synchronization gensets paralle cabinet | ||||
| Industrial Silencer 1pc | Heat Recovery System | ||||
| General repair kit 1 packet | Canopy | ||||
| Communication software,manual and drawing | Grid paralle cabinet | ||||
| Quality authentication and quality warranty card | PMG | ||||
| Start battery and cables | Alternator windings heating | ||||
| Gas safety Solenoid | |||||
| Gas filter | free water separator | ||||
| Engine Cooling Radiator | Genset running status SMS reminding function | ||||
| Gas genset control cabinet | horizontal type remote radiator | ||||
| 2.3 Engine Specifications | |||||
| Engine Producer / Model | CCEC Cummins | NTAA855 | |||
| Gas inlet System | Exhaust Gas Turbo,Air/Air Cooling, | ||||
| Ignition System | Canada AFS-CDI multi-sequential ignition engine management control system | ||||
| Speed Governor System | USA WOODWARD series integrated gas dedicated speed governor | ||||
| Air-Gas Mixing System | USA IMPCO proportional mixer.can realize lean burn. | ||||
| Cylinder Arrangement | 6 in line ,water cooling,2 valves,basin type combustion room | ||||
){kind=link}