Flow 4.5m3/S Head 12m Vertical Long-Axis Pump/Vertical Turbine Pump/Dewatering Water Pump

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 1200HBSA-12
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Suction Centrifugal
• Impeller: Open
• Usage: Pump
• Key Word: Vertical Mixed Flow Pump
• Type: 1200hbsa-12
• Flow: 4.5(M3/S)
• Head: 12.0(M)
• Shaft Power: 623.2(Kw)
• Speed: 495
• Efficiency: 85(%)
• Transport Package: Foam Plate Packaging/ Wooden Case Packing
• Specification: flow: 4.5m3/s, head 12m
• Trademark: AVESPEED
• Origin: Beijing, China
• Production Capacity: 300 Sets/Month

Product Description

1200mm Outlet diameter vertical long-axis mixed flow pump/Vertical Turbine Pump
General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

The packing and shipping:
1. The equipment suitable for transportation and safety requirements, for large parts, using nude, equipped with the necessary protection device, all the packing scheme should be submitted to the owner approval and can use, and signed the corresponding symbol can shipment, which avoid to deformation and damage in transit.
2. All joints, valves, flange, bolts and other spare parts have protection device and measures, in order to prevent the damage, corrosion, sundry into parts during transportation and storage.
3. All electronic, electrical and instrumentation equipment must be strictly packaging, to ensure safety during transportation and storage, and to prevent the equipment be damp and flooding.

Items	Parameter name	Unit	Working condition
1	type		1200HBSA-12
2	a single pump flow	m 3 /s	4.5
3	head	m	12.0
4	shaft power	kw	623.2
5	speed	R/pm	495
6	efficiency	%	85
7	pump body design pressure/test pressure	MPa	0.25/0.4
8	open head	m	21.5
9	normal bearing vibration value(double amplitude value)	mm	≤0.071
10	the minimum submerged depth from suction water bell mouth	m	2.39