3000m3/H Head 20m Long-Axis Vertical Drainage Pump/Vertical Turbine Pump/Vertical Long-Shaft Pump

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 600LP(T)-20
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Vertical Turbine Pump
• Pump Type: 600lp(T)-20
• Outlet Diameter(Mm): 600
• Capacity (M3/H): 3000
• Head (M): 20
• Speed (R/Min): 980
• Efficiency (%): 85
• Motor Power (Kw): 250
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 3000m3/h Vertical Turbine Pump
• Trademark: AVESPEED
• Origin: Beijing, China
• Production Capacity: 300 Sets/Month

Product Description

3000m3/h long-axis vertical drainage pump/Vertical Turbine Pump

Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.

: Structure specification:
1. The inlet of LP(T) Type Pump shall be vertical downward and the outlet horizontal above or under the base.
2. The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: Non-adjustable, semi-adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3. On the basis of LP Type Pump, LP(T) type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4. The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5. It applies water lubricating rubber bearing and packing seal.
6. The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti-reverse device, effectively avoiding reverse of pump.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
500LP(T)-20	500	2300	20	980	83	200
500LP(T)-25		2200	25		84	220
500LP(T)-30			30		83	280
500LP(T)-35			35		83	315
500LP(T)-40			40		83	355
600LP(T)-4	600	3000	4	730	84	45
600LP(T)-6			6		83	75
600LP(T)-8			8		85	110
600LP(T)-10			10		83	132
600LP(T)-12		3400	12	980	85	160
600LP(T)-15		3000	15		85	185
600LP(T)-20			20		85	250
600LP(T)-25			25		85	315
600LP(T)-30		4000	30	1480	84	500
600LP(T)-35			35		84	560
600LP(T)-40		3200	40		83	560
600LPTC-15			15	980	83	200
600LPTC-15-X			15		83	200
600LPTC-20		3000	20		83	250
600LPTC-20-X			20		83	250
700LP(T)-4	700	4500	4	730	83.5	75
700LP(T)-6			6		84.5	110
700LP(T)-8			8		82.5	160
700LP(T)-10			10		83.5	185
700LP(T)-12			12		83.5	220
700LP(T)-15			15	980	85.5	280
700LP(T)-20			20		86.5	355
700LP(T)-25			25		85	450
700LP(T)-30			30		85	560
700LPTC-15			15		84	280
700LPTC-15-X			15		84	280
700LPTC-20			20		85.5	355
700LPTC-20-X			20		85.5	355
800LP(T)-4	800	6400	4	585	85.1	110
800LP(T)-6		6000	6		84.8	160
800LP(T)-8		6500	8		84.5	220
800LP(T)-10		6400	10	590	83.5	250
800LP(T)-12		6200	12		84.3	315
800LP(T)-15		7000	15		84.5	450
800LP(T)-20		6200	20	730	86.5	500
800LP(T)-25		6200	25		85	600
800LP(T)-7-X		6000	7	590	85	185
800LP(T)-13.4-X		6700	13.4		84.8	355