10000m3/H Flow 10m Head Lp (T) Type Long-Axis Vertical Drainage Pump/Vertical Propeller Pump/Dewatering Water/Vertical Turbine Punmps

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 250 VCP4-95
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Vertical Turbine Pump
• Key Word: Vertical Pump
• Pump Type: 1000lp(T)-10
• Outlet Diameter(Mm): 1000
• Capacity (M3/H): 10000
• Head (M): 10
• Speed (R/Min): 490
• Efficiency (%): 85.2
• Motor Power (Kw): 400
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 10000m3/h Head: 10m Vertical Turbine Pump
• Trademark: AVESPEED
• Origin: China
• Production Capacity: 2000sets/Month

Product Description

10000m3/h head 10m  LP(T) type long-axis vertical drainage pump/Vertical Turbine Pump/Dewatering Pump

General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.

Specifications of Vertical Turbine Pumps

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
1000LP(T)-4	1000	9500	4	485	87	185
1000LP(T)-7		10500	7	485	87.1	315
1000LP(T)-9		10000	9	490	84.5	355
1000LP(T)-10			10		85.2	400
1000LP(T)-13			13		85.3	500
1000LP(T)-16			16		85.6	630
1000LP(T)-18			18		85.8	710
1000LP(T)-20			20		86.4	800
1000LP(T)-7-X		10500	7	485	87.1	315
1000LP(T)-13-X		10000	13	490	85.3	500
1000LP(T)-17-X			17		85.5	710
1000LPTC-15		9000	15		84.5	560
1000LPTC-15-X			15		84.5	560
1000LPTC-20			20	590	86	710
1000LPTC-20-X			20	590	86	710
1200LP(T)-4	1200	13500	4	490	84.2	250
1200LP(T)-6		15000	6		87.4	355
1200LP(T)-9		14500	9		84.5	560
1200LP(T)-12		14500	12		85.2	710
1200LP(T)-14		14000	14		85.3	800
1200LP(T)-16		13000	16		86.6	800
1200LP(T)-18		15000	18	495	85.8	1000
1200LP(T)-20		16000	20		86.4	1250