6200m3/H Flow Vertical Turbine Pump/Vertical Long Axis Drainage Pump/Dewatering Water Pump

• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Model NO.: 800LP(T)-20
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Semi-Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Vretical Turbine Pump
• Key Word: Vertical Pump
• Pump Type: 800lp(T)-20
• Outlet Diameter(Mm): 800
• Capacity (M3/H): 6200
• Head (M): 20
• Speed (R/Min): 730
• Efficiency (%): 86.5
• Motor Power (Kw): 500
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 6200m3/h Dewatering Water Pump
• Trademark: AVESPEED
• Origin: China
• Production Capacity: 300 Sets/Month

Product Description

Vertical long axis drainage pump/Vertical Turbine Pump

Advantage features:
1. It is fine designed with hydraulic design software. It makes impeller and other wearing parts has a long life because of anti-abrasive impeller and Diffuser. The pump is not only reliable, safe, steady but also saving energy.
2. There is filter in pump inlet with proper hole, this can not only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump efficiency.
3. Impeller adopts balance hole to balance axial force There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.
4. Pump middle shaft, water column and guard pipe are multi-burl, middle shaft uses technology of sleeve coupling. Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and Diffuser are multi-stage for different head.
5. Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethane or thereon bearing, it can also adopt rubber ( when the temperature of liquid is over 55° )
6. The remaining axial force of pump and the weight of rotor parts is borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.
7. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft, it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
500LP(T)-20	500	2300	20	980	83	200
500LP(T)-25		2200	25		84	220
500LP(T)-30			30		83	280
500LP(T)-35			35		83	315
500LP(T)-40			40		83	355
700LP(T)-4	700	4500	4	730	83.5	75
700LP(T)-6			6		84.5	110
700LP(T)-8			8		82.5	160
700LP(T)-10			10		83.5	185
700LP(T)-12			12		83.5	220
700LP(T)-15			15	980	85.5	280
700LP(T)-20			20		86.5	355
700LP(T)-25			25		85	450
700LP(T)-30			30		85	560
700LPTC-15			15		84	280
700LPTC-15-X			15		84	280
700LPTC-20			20		85.5	355
700LPTC-20-X			20		85.5	355
800LP(T)-4	800	6400	4	585	85.1	110
800LP(T)-6		6000	6		84.8	160
800LP(T)-8		6500	8		84.5	220
800LP(T)-10		6400	10	590	83.5	250
800LP(T)-12		6200	12		84.3	315
800LP(T)-15		7000	15		84.5	450
800LP(T)-20		6200	20	730	86.5	500
800LP(T)-25		6200	25		85	600
800LP(T)-7-X		6000	7	590	85	185
800LP(T)-13.4-X		6700	13.4		84.8	355