23760m3/H Head 24m Long-Axis Vertical Pump/Vertical Turbine Pump/Dewatering Pump

• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Model NO.: 1800LPTC-24-X
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Semi-Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Vertical Turbine Pump
• Key Word: Vertical Pump
• Pump Type: 1800lptc-24-X
• Outlet Diameter(Mm): 1800
• Capacity (M3/H): 23760
• Head (M): 24
• Speed (R/Min): 425
• Efficiency (%): 87.8
• Motor Power (Kw): 2000
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 23760M3/h Vertical Turbine PUmp
• Trademark: AVESPEED
• Origin: Beijing, China
• Production Capacity: 300 Sets/Month

Product Description

24m head long-axis vertical pump from supplier

General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.



Structure specification:
1. The inlet of LP(T) Type Pump shall be vertical downward and the outlet horizontal above or under the base.
2. The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: Non-adjustable, semi-adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3. On the basis of LP Type Pump, LP(T) type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4. The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5. It applies water lubricating rubber bearing and packing seal.
6. The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti-reverse device, effectively avoiding reverse of pump.
Specifications of Vertical Turbine Pump

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
1600LP(T)B-15.5(+4degree)	1600	42696	13.2	295	83	2500
		38340	18.4		86.8
		34848	20.2		85
1600LPTC-40	1600	12600	46.4	585	84.1	2500
		15300	41.9		86.9
		16200	40		86.8
1800LPTCQ-16	1800	18000	13.6	370	86	1600
		19800	14.8		87
		21600	16		88
		23400	17		88
		25200	18.3		88
1800LPTC-17	1800	18000	19.2	370	85	1250
		20340	17.3		88
		23760	12.7		81
1800LPTC-21	1800	17460	23	370	80	1600
		21672	21		89
		28728	13		80
1800LPTC-24-X	1800	19944	27.8	425	84.2	2000
		23760	24		87.8
		27072	19.5		84.3
1800LPT-26-X	1800	21600	28.6	495	86.3	2500
		23760	26.1		87.5
		25920	22.2		84.3
1800LPTC-28.5-X	1800	18000	31.3	370	84.2	2500
		21600	28.5		87
		26100	23.2		81
1800LP(T)-34	1800	23400	37.4	370	85.1	3600
		28800	33.8		88
		34200	27.2		81.9
1800LP(T)-34A	1800	21024	32.6	370	85	3200
		27252	29		88
		31788	24.5		82