10000m3/H 15m Head Long-Axis Vertical Drainage Pump/Vertical Propeller Pump/Dewatering Water Pump/Vertical Turbine Pump

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 1200LPTC-15-X
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Semi-Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Vertical Propeller Pump
• Key Word: Vertical Turbine Pump
• Pump Type: 1200lptc-15-X
• Outlet Diameter(mm): 1200
• Capacity (M3/H): 10000
• Head (M): 15
• Speed (R/Min): 490
• Efficiency (%): 84.5
• Motor Power (Kw): 630
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 10000m3/h Vertical Long-Shaft Pump
• Trademark: AVESPEED
• Origin: Beijing, China
• Production Capacity: 3000sets/Month

Product Description

10000m3/h flow long-axis vertical drainage pump/Vertical Turbine Pump

Structure specification:
1. The inlet of LP(T) Type Pump shall be vertical downward and the outlet horizontal above or under the base.
2. The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: Non-adjustable, semi-adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3. On the basis of LP Type Pump, LP(T) type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4. The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5. It applies water lubricating rubber bearing and packing seal.
6. The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti-reverse device, effectively avoiding reverse of pump.

Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
1200LP(T)-24	1200	14000	24	495	87	1250
1200LP(T)-8-X		14400	8	490	85.4	450
1200LP(T)-10-X		14000	10	490	85.3	560
1200LP(T)-17-X		14000	17	490	86.5	900
1200LPTC-15		10000	15	490	84.5	630
1200LPTC-15-X		10000	15	490	84.5	630
1200LPTC-19		6732	19	590	88	500
1200LPTC-19-X		6732	19	590	88	500
1400LPTC-9	1400	10656	10.6	370	83	500
		12816	8.5		87
		15228	5.8		82
1400LPTCB-10(-4 0 )	1400	7596	10.6	370	85.6	315
		8856	8.6		88.7
		9612	6.8		85.6
1400LPTCB-10(-2 0 )	1400	8172	11.4	370	85.6	350
		9792	9.2		88.8
		10800	7.2		85.6
1400LPTCB-10(0 0 )	1400	8820	12.2	370	85.6	400
		10620	10		89.1
		11880	7.7		85.6
1400LPTCB-10(+2 0 )	1400	9432	12.8	370	85.6	450
		11412	10.7		89.6
		12744	8.3		85.6
1400LPTCB-10(+4 0 )	1400	10260	13.4	370	85.6	500
		12240	11.3		89.2
		13500	9.3		85.6
1400LPTCQ-10	1400	8856	8.5	370	88.7	500
		9792	9.2		88.8
		10620	10		89.1
		11412	10.7		89.6
		12240	11.3		89.2
1400LP(T)-14	1400	15300	18.7	370	84.5	1000
		18000	14.2		89
		21096	8.9		79
1400LP(T)-60	1400	12600	66	495	82	3600
		16200	60		86
		19800	49.5		82
1400LP(T)-60A	1400	11700	57.5	495	80	3150
		15300	51.7		85
		18000	44.5		82
1400LP(T)-60B	1400	12600	47.5	495	81	2500
		14400	44.5		83
		16200	40		81