33300m3/H Flow (Head: 15.4m) Long-Axis Vertical Drainage Vertical Turbine Water Pump for Agricultural Irrigation

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 1600LP(T)-19
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Semi-Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump
• Pump Type: 1600lp(T)-19
• Outlet Diameter(mm): 1600
• Capacity (M3/H): 33300
• Head (M): 15.4
• Speed (R/Min): 330
• Efficiency (%): 83
• Motor Power (Kw): 2000 Double Speed Genset 1000kw
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 33300m3/h Vertical Turbine Pump
• Trademark: AVESPEED
• Origin: China
• Production Capacity: 300 Sets/Month

Product Description

33300m3/h capacity long-axis vertical drainage water pump

General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

Advantage features:

1. It is fine designed with hydraulic design software. It makes impeller and other wearing parts has a long life because of anti-abrasive impeller and Diffuser. The pump is not only reliable, safe, steady but also saving energy.
2. There is filter in pump inlet with proper hole, this can not only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump efficiency.
3. Impeller adopts balance hole to balance axial force There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.
4. Pump middle shaft, water column and guard pipe are multi-burl, middle shaft uses technology of sleeve coupling. Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and Diffuser are multi-stage for different head.
5. Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethane or thereon bearing, it can also adopt rubber ( when the temperature of liquid is over 55° )
6. The remaining axial force of pump and the weight of rotor parts is borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.
7. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft, it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
1600LP(T)B-16(-4degree)	1600	18360	16	330	83.4	1250
		20880	13.8		85.3
		23400	10.3		83.4
1600LP(T)B-16(-2degree)	1600	20160	17.3	330	82.4	1600
		23400	14.5		85.3
		24840	12.9		84.7
1600LP(T)B-16(0degree)	1600	22320	17.9	330	83.5	1600
		24480	16.1		85.7
		27360	13.5		85.3
1600LP(T)B-16(+2degree)	1600	25200	19.4	330	85	2000 double speed Genset 1000
		27000	18		86
		28800	16.4		85
		18000	11	246	84
		19800	10.2		86
		21600	9		85
1600LP(T)B-16(+4degree)	1600	27360	19.1	330	86.1	2000
		29880	17.2		86.9
		31680	15.4		86.1
1600LP(T)-19	1600	26100	21	330	82	2000 double speed Genset 1000
		30600	18.75		86
		33300	15.4		83
		19800	11.6	246	82
		22500	10.5		86
		24300	9.1		83
1600LP(T)B-15.5(-4degree)	1600	21600	18.3	295	82	1600
		28800	13.8		88
		33300	8.8		80