30m3/H Head 20m Lp (T) Type Long-Axis Vertical Drainage Pump/Vertical Turbine Pump

• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Model NO.: 65 LP(T)2-20
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Vertical Turbine Pump
• Motor Power (Kw): 4
• Efficiency (%): 55
• Speed (R/Min): 2890
• Head (M): 20
• Capacity (M3/H): 30
• Outlet Diameter(Mm): 65
• Pump Type: 65 Lp(T)2-20
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 30m3/h Vertical Turbine Pump
• Trademark: AVESPEED
• Origin: Beijing, China
• Production Capacity: 300 Sets/Month

Product Description

65mm bore LP(T) type long-axis vertical drainage pump


General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

Execute standards:
GB/T 5657 technical conditions of centrifugal pump, category III;
GB/T 13008 technical conditions of mixed flow pump, axial-flow pump.



Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
50LP(T)-10	50	15	10	2840	50	1.5
50LP(T)2-20			20	2870	50	3
50LP(T)3-30			30	2890	50	4
50LP(T)4-40			40	2890	50	5.5
50LP(T)5-50			50	2890	50	7.5
50LP(T)6-60			60	2900	50	11
50LP(T)7-70			70	2900	50	11
50LP(T)8-80			80	2930	50	11
50LP(T)9-90			90	2930	50	15
50LP(T)10-100			100	2930	50	15
65 LP(T)-10	65	30	10	2840	55	2.2
65 LP(T)2-20			20	2890	55	4
65 LP(T)3-30			30	2890	55	7.5
65 LP(T)4-40			40	2890	55	11
65 LP(T)5-50			50	2890	55	11
65 LP(T)6-60			60	2900	55	15
65 LP(T)7-70			70	2900	55	15
65 LP(T)8-80			80	2930	55	18.5
65 LP(T)9-90			90	2930	55	18.5
65LP(T)10-100			100	2930	55	22
80LP(T)-15	80	50	15	2900	60	5.5
80LP(T)2-30			30	2900	60	11
80LP(T)3-45			45	2900	60	15
80LP(T)4-60			60	2930	60	22
80LP(T)5-75			75	2930	60	30
80LP(T)6-90			90	2950	60	30
80LP(T)7-105			105	2950	60	37
100LP(T)-15	100	80	15	2900	65	7.5
100LP(T)-30			30	2930	65	15
100LP(T)2-60			60	2930	65	30
100LP(T)3-90			90	2950	65	45
100LP(T)4-120			120	2950	65	55
150LP(T)-20	150	150	20	1460	73	15
150LP(T)2-30			30	1470	72	22
150LP(T)2-40			40	1470	73	30
150LP(T)3-60			60	1480	72	45
150LP(T)4-80			80	1480	72	55
150LP(T)5-100			100	1490	72	75
150LP(T)6-120			120	1490	72	90
200 LP(T)-15	200	300	15	1470	75	22
200 LP(T)-20			20	1470	75	30
200 LP(T)2-30			30	1480	75	45
200 LP(T)2-40			40	1480	75	55
200 LP(T)3-65			65	1490	74	90
200 LP(T)4-90			90	1490	73	110