8000m3/H Head: 8m Long-Axis Vertical Drainage Pump/Vertical Turbine Pump/Vertical Long-Shaft Pump in Chemical Industry

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 900LP(T)-10
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, 30%T/T Before Production, 70%T/T Before Shipping
• Key Word: Drain Pump
• Pump Type: 900lp(T)-10
• Outlet Diameter(Mm): 900
• Capacity (M3/H): 8000
• Head (M): 10
• Speed (R/Min): 590
• Efficiency (%): 84.9
• Motor Power (Kw): 315
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Trademark: AVESPEED
• Origin: Beijing, China
• Production Capacity: 300 Sets/Month

Product Description

Long-axis Vertical Drainage Pump/Vertical Turbine Pump/Vertical Long-Shaft Pump in Chemical Industry
General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

Production overview:
Type LP vertical long-shaft pump is a newly developed product with both homeland and over-seas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, coal powder etc. ) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80° C. It is widely used in original water works, waste water factory, metallurgy and steel (especially suitable for delivering oxygenation iron sheet water), power station, mine, civil project and farmland etc.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
900LP(T)-4	900	8500	4	485	85.1	160
900LP(T)-6		8500	6	485	85.3	200
900LP(T)-8		8000	8	490	84.5	280
900LP(T)-10			10	590	84.9	315
900LP(T)-14			14		85.3	450
900LP(T)-16			16		85.2	500
900LP(T)-20			20		86.4	630
900LP(T)-25			25		85	800
900LP(T)-7-X			7	490	85.1	250
900LP(T)-12.6-X		9000	12.6	590	87	450
900LP(T)-17-X		8000	17		85.5	560
900LPC-15			15		84.5	500
900LPC-15-X			15		84.5	500
900LPC-20			20		85.5	630
900LPC-20-X			20		85.5	630
1000LP(T)-4	1000	9500	4	485	87	185
1000LP(T)-7		10500	7	485	87.1	315
1000LP(T)-9		10000	9	490	84.5	355
1000LP(T)-10			10		85.2	400
1000LP(T)-13			13		85.3	500
1000LP(T)-16			16		85.6	630
1000LP(T)-18			18		85.8	710
1000LP(T)-20			20		86.4	800
1000LP(T)-7-X		10500	7	485	87.1	315
1000LP(T)-13-X		10000	13	490	85.3	500
1000LP(T)-17-X			17		85.5	710
1000LPTC-15		9000	15		84.5	560
1000LPTC-15-X			15		84.5	560
1000LPTC-20			20	590	86	710
1000LPTC-20-X			20	590	86	710