Three phase 400V/50Hz/1500rpm/520kw open style diesel generator set
Standard Features:
1.All generator set comply with international design and quality standards, such as ISO8528(GB/T2820-97), ISO3046,
BS.EN60034, BS5000, IEC34-1, GB755, VDE0530, CSA22-2, AS1359, and so on.
2.Engine and alternator coupled with the compact base of structure steel, equipped with exhaust silencer and radiator.
3.AVESPEED designed controller IS900 and multiple circuit breaker as a standard configuration for single unit.
4.One year limited warranty covers all systems and components.
>>Prime power(Unlimited Time Running)
This rating is applicable for supplying electrical power in lieu of commercially purchased power.
Variable load should not exceed a 70% average of the prime power rating during any operating period of 250 hours,
The total operating time at 100% prime power shall not exceed 500 hours per year and this model can supply 10% over-load power for 1 hour in 12 hours.
>>Standby power
There rating should be applied where reliable utility power is available.
A standby rated engine should be sized for a maximum of an 80% average load factor and 200 hours of operation per year.
No overload capability is available for this rating.
NOTE 1:
All data is based on:
1. Engine operating with fuel system, water pump, lubricating oil pump, air cleaner and exhaust silencer;
not included are battery charging alternator, fan, and optional driven components.
2. Engine operating with fuel corresponding to grade No. 2-D per ASTM D975.
3. ISO 3046, Part 1, Standard Reference Conditions of:
Barometric Pressure: 100 kPa (29.53 in Hg)
Air Temperature : 25 degree centigrade;
Altitude:110 m (361 ft); Relative Humidity:30%;
Air Intake Restriction: 254 mm H2O (10 in H2 O);Exhaust Restriction : 51 mm Hg (2 in Hg).
4. Backed by worldwide service network.
N/A : Not Available;
TBD: To Be Determined;
NOTE 2:
1. Alternators meet the requirement of BS EN 60034 and the relevant section of other international standards such as BS5000,
VDE 0530, NEMA MG1-32, IEC34, CSAC22.2-100, As1359, and other standards and certifications can be considered on request.
2. Brushless alternator with brushless pilot exciter for excellent load response.
3. Backed by worldwide service network.
Product Packages:
Export wooden case (standard) or Plywood case (optional)
Specification
| Model Specification |
KTAA19-G6A |
QSKTAA19-G3 |
|
| BASIC TECHNICAL DATA |
|
| Engine type |
4-cycle,T=turbocharged, AA= /air-air after-cooled |
|
| Cylinder arrangement |
6 cylinders vertical in-line |
|
| Bore and stroke(mm) |
159×159 |
159×159 |
|
| Compression ratio |
13.0:1 |
15.0:1 |
|
| Displacement(L) |
18.9 |
19 |
|
| Estimated total weight (dry)(kg) |
1905 |
1900 |
|
| Engine rated speed(rpm) |
1500 |
|
| Prime power(kW).gross |
N/A |
574 |
|
| Standby power(kW).gross |
610 |
634 |
|
| EXHAUST SYSTEM |
|
| Air intake flow(L/sec).rate |
750 |
775 |
|
| Exhaust flow ( L/sec ).rate |
2054 |
1975 |
|
| Exhaust temperature.rate |
584 |
505 |
|
| Max. back pressure(mmHg) |
76 |
10.2kpa |
|
| Diameter of exhaust pipe (mm) |
TBD |
TBD |
|
| COOLING SYSTEM |
|
| Coolant capacity(only engine)(L) |
30 |
41.6 |
|
| FUEL CONSUMPTION |
|
| Standby power(L/h) |
150 |
156 |
|
| 100% prime power(L/h) |
127 |
143 |
|
| 75% prime power(L/h) |
96 |
109 |
|
| 50% prime power(L/h) |
64 |
77 |
|
| LUBRICATION SYSTEM |
|
| Oil pan capacity(L) |
50 |
84.4 |
|
| ELECTRIC SYSTEM |
|
| Governor type |
Electronic |
ECM |
|
| Starter motor |
24V |
24V |
|
| Battery charging system |
35A |
35A |
|
Audited Supplier 
){kind=link}