1250m3/H Head 50m Lp (T) Series Vertical Turbine Pump/Vertical Long-Shaft Pump/Dewatering Water Pump for Agricultural Irrigation/

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 400LP(T)2-50
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Semi-Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Vertical Turbine Pump
• Pump Type: 400lp(T)2-50
• Outlet Diameter(Mm): 400
• Capacity (M3/H): 1250
• Head (M): 50
• Speed (R/Min): 1490
• Efficiency (%): 80
• Motor Power (Kw): 280
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: 1250m3/h Head 50m Vertical Turbine Pump
• Trademark: AVESPEED
• Origin: China
• Production Capacity: 300 Sets/Month

Product Description

1250m3/h Head:50m Vertical Turbine Pump/Vertical Propeller Pump

General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

Operational conditions:
1. The temperature of medium shall not be higher than 60Co.
2. The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3. For LP type pump, the content of suspended substances in the medium shall be less than 150mg/L; For LPT type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4. LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two-stage pump, lubricant pressure shall not be less than half of operational pressure.
5. The first stage impeller of pump shall be immersed in 0.5m above at min. Water level and generally it is suggested to be within 2~3 m.
6. The wellbore shall be straight.
7. Specify the depth of well or under-liquid depth of pump in the order list.
8. Special operational condition is subject to agreement or technical agreement.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
350LP(T)-4	350	1000	4	1470	74	22
350LP(T)-6			6	1470	75	30
350LP(T)-8			8	1470	75	37
350LP(T)-10			10	1470	76	45
350LP(T)-15		900	15	1480	77	75
350LP(T)-20			20	1490	78	90
350LP(T)2-30			30	1490	77	132
350LP(T)2-40			40	1490	78	160
350LP(T)3-60			60	1490	77	250
350LP(T)4-80			80	1490	77	315
400LP(T)-4	400	1500	4	1470	75	30
400LP(T)-6			6	1470	77	45
400LP(T)-8			8	1470	80	55
400LP(T)-10			10	1470	80	75
400LP(T)-13			13	1470	78	90
400LP(T)-16			16	1480	78	110
400LP(T)-20		1250	20	1490	80	110
400LP(T)-25			25	1490	80	132
400LP(T)-30			30	1490	80	160
400LP(T)-35			35	980	80	220
400LP(T)2-40			40	1490	80	200
400LP(T)2-50			50	1490	80	280
400LP(T)2-60			60	1490	80	315
500LP(T)-4	500	2200	4	980	82	37
500LP(T)-6			6	980	81	55
500LP(T)-8		2300	8	980	81	75
500LP(T)-10		2200	10	980	82	90
500LP(T)-12			12	980	84	110
500LP(T)-15			15	980	85	132