1400mm Diameter Long-Shaft Pump/Vertical Turbine Pump/Vertical Discharge Pump

• After-sales Service: Provide Technical Support
• Warranty: 12months
• Max.Head: >150m
• Model NO.: 1400LP(T)-14
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Semi-Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Pump Type: Vertical Turbine Pump
• Pump Model: 1400lp(T)-14
• Outlet Diameter(mm): 1400
• Capacity (M3/H): 18000
• Head (M): 14.2
• Speed (R/Min): 370rpm
• Efficiency (%): 89%
• Motor Power (Kw): 1000
• Transport Package: Poly Plastic Firm, Wooden Box or as Need
• Specification: flow: 18000m3/h
• Trademark: AVESPEED
• Origin: Beijing, China
• HS Code: 8502131000
• Production Capacity: 300 Sets/Month

Product Description

1400mm diameter Long-Shaft pump/vertical-Turbine pump
General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

Advantage features:

1. It is fine designed with hydraulic design software. It makes impeller and other wearing parts has a long life because of anti-abrasive impeller and Diffuser. The pump is not only reliable, safe, steady but also saving energy.
2. There is filter in pump inlet with proper hole, this can not only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump efficiency.
3. Impeller adopts balance hole to balance axial force There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.
4. Pump middle shaft, water column and guard pipe are multi-burl, middle shaft uses technology of sleeve coupling. Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and Diffuser are multi-stage for different head.
5. Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethane or thereon bearing, it can also adopt rubber ( when the temperature of liquid is over 55° )
6. The remaining axial force of pump and the weight of rotor parts is borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.
7. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft, it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.

Pump type	Outlet diameter(mm)	Capacity (m 3 /h)	Head (m)	Speed (r/min)	Efficiency (%)	Motor Power (KW)
1200LP(T)-24	1200	14000	24	495	87	1250
1200LP(T)-8-X		14400	8	490	85.4	450
1200LP(T)-10-X		14000	10	490	85.3	560
1200LP(T)-17-X		14000	17	490	86.5	900
1200LPTC-15		10000	15	490	84.5	630
1200LPTC-15-X		10000	15	490	84.5	630
1200LPTC-19		6732	19	590	88	500
1200LPTC-19-X		6732	19	590	88	500
1400LPTC-9	1400	10656	10.6	370	83	500
		12816	8.5		87
		15228	5.8		82
1400LPTCB-10(-4 degree)	1400	7596	10.6	370	85.6	315
		8856	8.6		88.7
		9612	6.8		85.6
1400LPTCB-10(-2 degree)	1400	8172	11.4	370	85.6	350
		9792	9.2		88.8
		10800	7.2		85.6
1400LPTCB-10(0degree)	1400	8820	12.2	370	85.6	400
		10620	10		89.1
		11880	7.7		85.6
1400LPTCB-10(+2degree)	1400	9432	12.8	370	85.6	450
		11412	10.7		89.6
		12744	8.3		85.6
1400LPTCB-10(+4degree)	1400	10260	13.4	370	85.6	500
		12240	11.3		89.2
		13500	9.3		85.6
1400LPTCQ-10	1400	8856	8.5	370	88.7	500
		9792	9.2		88.8
		10620	10		89.1
		11412	10.7		89.6
		12240	11.3		89.2
1400LP(T)-14	1400	15300	18.7	370	84.5	1000
		18000	14.2		89
		21096	8.9		79
1400LP(T)-60	1400	12600	66	495	82	3600
		16200	60		86
		19800	49.5		82
1400LP(T)-60A	1400	11700	57.5	495	80	3150
		15300	51.7		85
		18000	44.5		82
1400LP(T)-60B	1400	12600	47.5	495	81	2500
		14400	44.5		83
		16200	40		81