Three phase 3300V/50Hz/1500rpm/1800kw diesel generator set
Standard Features:
1.All generator set comply with international design and quality standards, such as ISO8528(GB/T2820-97), ISO3046,
BS.EN60034, BS5000, IEC34-1, GB755, VDE0530, CSA22-2, AS1359, and so on.
2.Engine and alternator coupled with the compact base of structure steel, equipped with exhaust silencer and radiator.
3.AVESPEED designed controller IS900 and multiple circuit breaker as a standard configuration for single unit.
4.One year limited warranty covers all systems and components.
>>Prime power
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% over-load power for 1 hour in 12 hours.
>> Standby power
There ratings are available at variable load in the event of a main power network failure for a maximum of 500 hours per year. No overload is permitted.
NOTE:
All data is based on:
1. Engine operating with fuel system, water pump, lubricating oil pump, air cleaner and exhaust silencer; not included are battery charging alternator, fan, and optional driven components.
2. Engine operating with fuel corresponding to grade No. 2-D per ASTM D975.
3. ISO 3046, Part 1, Standard Reference Conditions of:
Barometric Pressure: 100 kPa (29.53 in Hg)
Air Temperature : 25 degree centigrade (77); Altitude:110 m (361 ft); Relative Humidity:30%;
Air Intake Restriction: 254 mm H2O (10 in H2 O);Exhaust Restriction : 51 mm Hg (2 in Hg).
4. Backed by worldwide service network.
N/A : Not Available; TBD: To Be Determined;
NOTE:
1. Alternators meet the requirement of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSAC22.2-100, As1359, and other standards and certifications can be considered on request.
2. Brushless alternator with brushless pilot exciter for excellent load response.
3. Backed by worldwide service network.
Specifications of 1800KW Diesel Generator Set
Model
Specification |
4016-61TRG3 |
| BASIC TECHNICAL DATA |
| Engine type |
4-cycle,turbocharged,
air to water charge cooled |
| Cylinder arrangement |
16cylinders,Vee 60° |
| Bore and stroke(mm) |
160×190 |
| Compression ratio |
13:1 |
| Displacement(L) |
61.123 |
| Estimated total weight (dry)(kg) |
5570 |
| Engine rated speed(rpm) |
1500 |
| Prime power(kW).net |
1875 |
| Standby power(kW).net |
2083 |
| EXHAUST SYSTEM |
| Combustion air inlet flow(m 3/min).rate |
160 |
| Exhaust gas flow (m3 /min).rate |
490 |
| Maximum back pressure(kPa) |
4.0 |
| Exhaust gas temperature outlet (rate)(degree centigrade) |
475 |
| Exhaust outlet size-horizontal/vertical(mm) |
254 |
| COOLING SYSTEM |
| Total system capacity(with radiator)(L) |
95(engine only) |
| Radiator face area(M²) |
TBD |
| FUEL CONSUMPTION |
| Standby power(L/h) |
528 |
| 100% prime power(L/h) |
473 |
| 75% prime power(L/h) |
346 |
| 50% prime power(L/h) |
235 |
| LUBRICATION SYSTEM |
| Total system capacity |
213 |
| ELECTRIC SYSTEM |
| Governor type |
Electronic |
| Starter motor |
24V/-16.4KW |
Audited Supplier 
){kind=link}